UN500D1 | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
INJECTION UNIT | 1885 | 2695 | 3330 | 4800 | |||||||||
A | B | C | A | B | C | A | B | C | A | B | C | ||
Screw diameter | mm | 60 | 68 | 76 | 68 | 76 | 84 | 76 | 84 | 92 | 84 | 92 | 108 |
Shot volume | cm³ | 834 | 1071 | 1338 | 1198 | 1497 | 1829 | 1678 | 2050 | 2460 | 2217 | 2659 | 3664 |
Shot weight | g | 767 | 986 | 1321 | 1103 | 1377 | 1683 | 1544 | 1886 | 2263 | 2039 | 2446 | 3371 |
Injection pressure | MPa | 226 | 176 | 141 | 225 | 180 | 147 | 199 | 162 | 136 | 218 | 181 | 131 |
Screw L:D ratio | 22.6 | 20 | 20 | 22.3 | 20 | 20 | 22.1 | 20 | 20 | 21.9 | 20 | 20 | |
Injection rate | cm³/s | 322 | 414 | 517 | 383 | 478 | 584 | 430 | 526 | 632 | 516 | 619 | 853 |
Max. injection speed | mm/s | 114 | 105 | 95 | 93 | ||||||||
Screw stroke | mm | 295 | 330 | 370 | 400 | ||||||||
Max. screw speed | r/min | 250 | 184 | 147 | 154 | ||||||||
Barrel heating zone no. | PCS | 5 | 6 | 6 | 6 | ||||||||
CLAMPING UNIT | |||||||||||||
Clamping force | kN | 5000 | |||||||||||
Opening force | kN | 390 | |||||||||||
Platen size | mm | 1270 x 1260 | |||||||||||
Distance between tie-bars | mm | 910 x 830 | |||||||||||
Mould thickness (min-max) | mm | 350 - 950 | |||||||||||
Opening stroke | mm | 1300 / 750 | |||||||||||
Max. daylight | mm | 1650 | |||||||||||
Ejector force | kN | 110 | |||||||||||
Ejector stroke | mm | 250 | |||||||||||
Ejector number | PCS | 21 | |||||||||||
ELECTRICAL & HYDRAULIC UNITS | |||||||||||||
System pressure | MPa | 17.5 / 30 | 17.5 / 30 | 17.5 / 30 | 17.5 / 30 | ||||||||
Pump motor | kW | 55.6 + 7.5 | 65 + 7.5 | 60 + 7.5 | 66 + 7.5 | ||||||||
Total power | kW | 85.3 | 85.3 | 87.7 | 93.9 | 93.9 | 98.4 | 100.6 | 100.6 | 103.7 | 111.3 | 111.3 | 120.5 |
Heater power | kW | 22.2 | 22.2 | 24.6 | 26.4 | 26.4 | 30.9 | 33.1 | 33.1 | 36.2 | 37.82 | 37.82 | 47 |
GENERAL | |||||||||||||
Oil tank capacity | L | 650 | 750 | 750 | 1000 | ||||||||
Machine dimensions (LxWxH) | m | 7.4 x 2.3 x 2.5 | 7.5 x 2.3 x 2.6 | 7.5 x 2.3 x 2.6 | 7.8 x 2.3 x 2.6 | ||||||||
Machine weight | T | 12 + 4 | 12 + 5 | 12 + 5.5 | 12 + 6.5 | ||||||||
Max. mould weight | T | 8 | 8 | 8 | 8 |